Tuesday, September 27, 2022
HomeMobile ReviewAqara Curler Shade Driver E1 evaluation: Good curler blinds that's zippy

Aqara Curler Shade Driver E1 evaluation: Good curler blinds that’s zippy


The Aqara Curler Shade Driver E1 curler shutter motor could be retrofitted in a matter of minutes, making present curler shutters with pull chains a complete lot smarter. We reviewed the gadget, which prices round €60. Do take be aware that it’s not out there formally within the US.

NextPit Logo white on transparent Background

NEXTPITTV

Good

  • Simple set up course of
  • Many prospects relating to organising routines and automatic habits
  • IFTTT, Homekit, Siri, Alexa, and Google Assistant help
  • Stable workmanship and inexpensive value

Dangerous

  • Buttons ought to react quicker
  • Motor runs slightly slowly

The Aqara Curler Shade Driver E1 in a nutshell

It would not get any simpler than this: Be aware of the thread within the rigidity chain of your curler blind, mark its place, glue or screw on the field, scan the QR code, and also you’re good to go. In a matter of simply ten minutes, you could have made your curler blind sensible with the Aqara Curler Shade Driver E1. The app additionally presents quite a few configuration choices and the producer presents a variety of suitable sensible dwelling merchandise.

Contemplating the comparatively low-cost value of round €60, ths is a slightly strong construct that doesn’t want a everlasting energy connection due to the built-in battery. If solely the motor might run a bit quicker and the buttons on the case might react a wee bit quicker, that’s all that we ask for. Nevertheless, this shouldn’t be an issue for individuals who need the curler blinds to be absolutely automated within the first place.

Aqara Roller Shade Driver E1
You may management the Curler Share Driver both by way of the 2 buttons or by way of the app. / © NextPit

The Aqara Curler Shade Driver E1 is presently out there for round €60 in varied on-line shops corresponding to Amazon. To make use of the machine, additionally, you will want a hub, for instance the Aqara Hub E1, which could be discovered for simply shy of $30.

Aqara G3 Camera Hub
In our evaluation, we used this surveillance digital camera referred to as Aqara G3 Digicam Hub as a Zigbee hub. / © NextPit

Setup and design

At first look, the Aqara Curler Shade Driver E1 resembles a Wiimote from Nintendo.
As an alternative of flying across the room whereas enjoying Wii Sports activities Tennis, the Curler Shade Driver prefers a extra muted persence, hanging in an unspectacular method on the wall as you progress your curler blind up and down. What’s an particularly good contact: Due to the built-in battery, you do not have to put yet one more ugly cable across the dwelling.

To put in the Curler Shade Driver E1, you’ll first should take away the plastic cap on the prime finish. Beneath is the shaft of the electrical motor, on which there’s already a receptacle for the widespread curler blind bead chains. In case your curler blind makes use of a special kind of chain, you can see three extra adapters within the field.

Aqara Roller Shade Driver E1
Grasp the Curler Shade Driver E1 on the lowest level and mark the place on the wall, from the place you’ll be able to then connect the wall bracket. Various chain adapters are included. / © NextPit

Now all it’s important to do is hook the Curler Shade Driver E1 into the chain of your curler blind on the lowest attainable level, holding it towards the wall and marking the underside finish of the housing with a horizontal line. Observe that by separating the wall bracket from the housing and attaching it with the decrease finish on the marked peak. This may be completed both utilizing the included adhesive pad or with two dowels and screws which can be additionally included.

Following that, merely slide the curler shutter motor again onto the wall bracket and the set up is full. With the 2 up and down buttons on the housing, now you can already remotely transfer the shutter up and down. Nevertheless, do watch out: The motor nonetheless doesn’t know the top factors can can run in each instructions infinitely.

Aqara Roller Shade Driver E1
We hooked up the wall mount for the Aqara Curler Shade Driver E1 to the wall with the included adhesive pad. It has remained firmly in place since. / © NextPit

By the best way, it was no downside within the take a look at that the axis of our curler blind and the axis of the motor are offset by 90 levels. Simply make it possible for the chain is just not too tight throughout set up – the chain ought to solely have a slight rigidity, not be taut like a guitar string.

Setup by way of software program

The second a part of the setup takes place within the app. To make use of the Curler Shade Driver E1, you’ll first want a Zigbee hub. A cheap answer is the Aqara Hub E1, which prices $29.99. Nevertheless, Aqara additionally has a number of sensible dwelling merchandise in its portfolio with built-in hub, for instance the G3 Digicam Hub, which then additionally empowers you with a number of extra good tips. Extra on that later.

To arrange the Curler Shade Driver E1, all it’s important to do is scan the QR code on the again within the app and comply with the directions on the smartphone show to set the top factors of the motor for the highest and backside positions. It took lower than two minutes to arrange the curler shutter motor within the evaluation.

Aqara Roller Shade Driver E1 Screenshots
Decide the route of motion, set the very best and lowest positions – and the setup is full. / © NextPit

Now comes probably the most thrilling half:
You may arrange completely different scenes and automatic habits for the Aqara Curler Shade Driver E1.
With automated behaviour, for example, you’ll be able to have the curler shutter motor transfer to sure positions at chosen occasions, corresponding to at 6 o’clock within the morning from fully closed to 90 %, to 60 % within the afternoon, and again to zero % or fully closed within the night.

You too can hyperlink different sensors to the Curler Shade Driver E1. Because the G3 Digicam Hub presents gesture recognition, you’ll be able to shut the curler blind with a high-five gesture. This really labored flawlessly within the evaluation. Other than that, you can see plenty of buttons and rocker switches, movement sensors, vibration sensors, door and window sensors and extra within the Aqara portfolio. Simply have a gander and see whether or not something fits your fancy.

You too can arrange chosen scenes with a number of parts, corresponding to for “Film”. Right here, the room shall be mechanically darkened and maybe even have the lights within the room dimmed. These scenes can then even be managed by way of a voice assistant like Siri. Talking of which, the Curler Shade Driver E1 additionally helps the Apple Homekit and may thus be built-in into your Apple ecosystem. Moreover, there’s help for IFTTT in addition to Alexa Ability and Google Assistant.

Aqara Roller Shade Driver E1 Screenshots
When you’ve got an Aqara digital camera with gesture management help, you’ll be able to shut the curler blind by way of a Excessive 5 gesture (left). The Curler Shade Driver E1 additionally helps Siri, Alexa, and Google Assistant in addition to IFTTT. / © NextPit

Aqara Curler Shade Driver E1 efficiency

By way of efficiency, there’s little or no to complain concerning the Curler Shade Driver E1.
The motor additionally manages the slightly stiff NextPit editorial curler blind with none issues. Nevertheless, the motor runs comparatively slowly. It took a great 33 seconds for our 2.20-meter-long curler blind to journey from the very backside proper to the very prime. The pace could be configured in three levels within the app, however the quickest choice was already chosen right here.

Aqara Roller Shade Driver E1
The motor has plenty of energy, however doesn’t run very quick. / © NextPit

The buttons on the Curler Shade Driver might additionally react a bit quicker for my part. Every time the button is pressed, it takes a second for the motor to start out. If the curler blind runs virtually autonomously by way of scenes and automations, then this isn’t noticeable in any respect. Nevertheless, if you wish to exit to the balcony proper now, it needs to be a bit quicker.

As talked about at the start, the Curler Shade Driver E1 runs on battery energy. In response to the producer, the battery lasts for 2 months in the event you open and shut a 1.80 m lengthy curler blind as soon as a day. Sadly, we can not confirm this data because of the lack of time to carry out an endurance take a look at. Nevertheless, seeing how the battery stage dropped from 51 to 49 % after three days of use, the sort of battery life efficiency shared by the producer does sound believable.

The battery is recharged by way of USB Kind-C. This implies you’ll be able to plug in a powerbank or hook it as much as an AC adapter each two months to recharge the battery fully. When you’ve got an influence outlet close by, you’ll be able to in fact additionally join the Curler Shade Driver to an influence adapter completely.

Closing verdict

It took simply 10 minutes from set up to testing it out – and the Aqara Curler Shade Driver E1 labored flawlessly as promised by the producer. The one disadvantage is the considerably sluggish response. Each the keys and the motor itself ought to react and run a bit quicker in  our opinion. In view of the low buy value, nonetheless, that is simply forgiven, particularly for the reason that curler blind is never operated manually.

RELATED ARTICLES

LEAVE A REPLY

Please enter your comment!
Please enter your name here

one + eleven =

Most Popular

Recent Comments